Edison
Design
http://www.intel.com/content/dam/support/us/en/documents/edison/sb/edisonbreakout_hg_331190006.pdf
- Main Power Input = J21
- Apply 7-15 VDC with the polarity shown micro B is OK, but micro A you must supply external power via J21 or J22
Intel Edison Breakout Board Kit
sudo screen /dev/ttyUSB0 115200 -L root
wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
configure_edison --name configure_edison --password configure_edison --wifi 1 [SSID] Y 2 [PASSWORD] ## Initiating connection to [SSID]... ## Done. Network access should be available shortly, please check 'wpa_cli status'. ## Connected. Please go to 192.168.0.1 in your browser to check if this is correct.
ssh root@192.168.0.1
Acknowledgments
Daiphys is a professional-service company for research and development of leading-edge technologies in science and engineering.
Get started accelerating your business through our deep expertise in R&D with AI, quantum computing, and space development; please get in touch with Daiphys today!
Daiphys Technologies LLC - https://www.daiphys.com/